Concrete Slab Repair in Oklahoma City – Facts You Need to Know

Common concrete repairs like drying shrinkage cracks, blemishes, popouts, and plastic shrinkage cracks. They should be attended to right away to avoid long term damage to the property or slabbed area. Concrete slab repair can be done with routing, sealing, stitching, plugging and drilling, epoxy injection, grouting, and concrete gravity crack filling. Concrete Slab Repair in Oklahoma City helps your slab repair with any of these methods reliably, high in quality, and affordably.

Suitable Methods of Concrete slab repair

Concrete slab repair is done depending on the assessment of the type of repair in the framework and its causes. When the crack type is set up and the reason is known, then an appropriate method could be selected.

Inspections

Inspections are done using an engineered approach to determine the dormant visible cracks. The majority of the plastic shrinkage and drying appear to post the slab placement. These are non-structural cracks and determine for a dormant crack by measuring depth and width over a brief period. If there is crack’s movement then it is severe. Then the underlying cause has to be inspected.

Popouts

Popouts are blemishes on a concrete slab. These are different from cracks since smaller pieces of the concrete break off from the slab surface. They are called cosmetic blemishes and don’t impact the service life or the slab functioning. There are unsound aggregates below the surface that absorbs moisture and swells by pushing the slab upward. The push can result in an eruption. It leaves a cone-shaped shallow hole. These popouts can impact surrounding concrete surfaces. They eventually weak the crust of the slab.

Methods of concrete slab repair

Popout repairs– Eliminate the rock pieces that are present in the hole and lodged within. This will eliminate any repetition. Eliminate the weakened concrete around the popout. Scrape with a wire brush. Preblended shrinkage-resistant products provide good adhesion to these popouts.

Epoxy injection- This is employed for narrow cracks like 0.05mm/0.002 inch. This method is usually comprised of setting up venting and entry ports in small intervals along the cracks, injecting and sealing the crack with epoxy below pressure. Epoxy injection is utilized in the slab repair in bridges, concrete structures, buildings, and dams. But, the root cause of cracking has to be repaired for it not to recur. When this cause is not eliminated, then 2 choices are available. One is to seal and the other is to rout the crack. Set up as a joint that will accommodate the motion and then place the epoxy injection in the crack or appropriate material. This will help in avoiding leakages and specific epoxies that are tolerant to moisture.

Final step-Once all the repairs are done, curing is done. The curing process is done for strengthening the repair.

Conclusion

Concrete slab repair is the process of inspection, repair, and curing. There are leading companies for concrete slab repair in Oklahoma City which deal with concrete repairs, popouts, blemishes, and so on. Concrete slab repair should be attended to right away with proper evaluation and assessment. Once the cause is sorted, repair the root cause, and then curing the repair is of utmost importance. The leading companies do this work for you reliably, in high quality, and affordably.

Bill’s Custom Concrete & Yard Drainage Also Offers Following Services :

French Drain Systems Oklahoma City

Concrete Work Norman OK

Concrete Overlay Oklahoma City

Erosion Control OKC

Contact US:

Bill’s Custom Concrete & Yard Drainage
Address: 14609 Remington Way, Oklahoma City, OK
Phone: (405) 755-3975